1. Contact with private parts of the human body
2. Repeated use
3. Need to be easy to clean
Therefore, silicone becomes the ideal material for sex toys. Silicone has the following characteristics:
1. The temperature range is -65 ℃-200 ℃, can be used for a long time and maintain its soft and elastic properties,
2. Has excellent electrical properties and chemical stability, water resistance, ozone resistance, weather resistance,
3. It is physiologically inert, non-corrosive, non-toxic, and odorless, with low linear shrinkage and easy to operate.
Silica gel is a low viscosity, sticky, gel-like transparent, two-component addition-forming silicone gel that can be cured at room temperature or by heating. It has the characteristics of higher temperatures and faster curing. This product does not produce any by-products during the curing reaction and can be applied to PC (Poly-carbonate), PP, ABS, PVC, and other materials and metal surfaces. Suitable for insulation, waterproof, and fixing of electronic accessories.
Silicone use:
Silicone gel is mainly used for flexible silicone rubber products such as human body shape, sex organs, chest pads, shoulder pads, patches, anti-skid pads, etc. It can also be used for human face molds. Silicone gel is mainly used for human faces, imitating human limbs, and invariable shapes. Change, soft touch.
Silicone gel characteristics:
This gel can maintain elasticity for a long time in the temperature range of -65 ~ 200 ℃, it has excellent electrical properties and chemical stability. It is water-resistant, ozone-resistant, weather-resistant, water-repellent, moisture-proof, shock-proof, non-corrosive, and has the advantages of physiological inertness, non-toxicity, tastelessness, easy infusion, deep vulcanization, low linear shrinkage, and simple operation.
Silicone gel operation method:
1. Before mixing, first, fully mix component A and component B in their respective containers.
2. When mixing, the weight ratio of component A: component B = 1:1 should be observed.
3. Defoaming can be carried out according to need when using. The A and B mixed liquid can be stirred and put into a vacuum container, defoamed at 0.08MPa for 5 minutes, and then can be used for pouring.
4. Add molded silicone gel, before and after curing, the temperature given in the technical parameter table should be maintained, and the corresponding curing time should be maintained. If the application thickness is thick, the curing time may be exceeded. It can be cured at room temperature or by heating. The curing speed of the glue is affected by the curing temperature. It takes a long time to cure in winter. It is recommended to use heating to cure. It is cured at 80 to 100 ℃ for 20 minutes, and it usually takes about 8 hours to cure at room temperature.
Note: Do not contact this silica gel with any other condensed silica gel, otherwise it will cause curing agent poisoning, which will cause the phenomenon that the silica gel will not cure. Water, impurities, organic tin catalysts, acids, alkalis, and other organic materials containing sulfur, phosphorus, and nitrogen can affect the curing of the glue. Do not mix or contact these substances during use.
Here is a website that sells adult products: love doll
